Paperback Writer

As part of KCWC , I finally moved these jeans from my UFO basket and completed them. They have been sitting in the basket for months waiting for me to sew them together.



The pattern is Paperback writer, or design 31 from the Winter 2010 issue of Ottobre magazine. I really like the name, the song was playing in my head whilst I was making these jeans.



These jeans are made for boys with long, very skinny legs. It is recommended for those that have a waist size 4cm smaller than the charts in the magazine, so if you've got a skinny-mini, then this pattern is for you.

One thing I would do differently, is I wouldn't add a seam allowance to the curved edges of the front pockets pieces and facings. I did for this pair, but I've gone and chopped it off my pattern pieces because the pockets get in the way of the fly area.



I've added rivets to the top corners of the back pockets and to the side-seam corner of the front pockets as well as to the top corners of the coin pocket. One of the rivets on the coin pocket is completely hidden, so was un-necessary. I would recommend that if you plan to add rivets to the jeans, they can all be added at the end, anyway, so that would be the way to go.



Another point with the rivets is that I have used two kinds, only because I started with one type, and then realised I didn't have enough. So the two rivets on the sides of the pockets are different to the other rivets. I prefer the look of the other rivets, and they also have skinnier post, which means I can push them through a smaller hole more easily.



I used three sewing machines to put these jeans together; my regular machine for the seams, my over-locker for neatening the edges and also the industrial machine for the top-stitching. You could make these jeans on one machine, but by using my industrial machine for the top-stitching, it saved me threading and rethreading my machine over and over. I used Gutermann upholstery thread, in colour 968. This is a 100% polyester thread and is quite a bit heavier than the regular, sew-all thread. A 100m reel is about the same size as a 250m spool of sew-all. Sadly, I have heard rumours that Gutermann are discontinuing the upholstery thread, so I will be on the look-out for a suitable replacement.



I think the most exciting part of making these jeans is that I got to try out my new jeans snaps and dyes for the snap press. I really need to be making lots more jeans to make the investment worthwhile, but don't they look fantastic?!